| ....................Book Chapters.................... | | 1) Javadian, N., Gol-Alikhani, M. and Tavakkoli-Moghaddam, R., A discrete binary version of the electromagnetism-like heuristic for solving traveling salesman problem, In: D.-S. Huang, D.C. Wunsch II, D.S. Levine and K.-H. Jo (Eds.), Advanced Intelligent Computing Theories and Applications. With Aspects of Artificial Intelligence, The 4th International Conference on Intelligent Computing (ICIC 2008), Shanghai, China, September 15-18, 2008, Lecture Notes in Artificial Intelligence (LNAI), Vol. 5227, Springer-Verlag, ISBN 978-3-540-85983-3, pp. 123-130, 2008. | | 2) Tavakkoli-Moghaddam, R., Ghezavati, V.R., Kaboli, A. and Rabbani, M., An efficient hybrid method for an expected maximal covering location problem, In: N.T. Nguyen and R. Katarzyniak (Eds.), New Challenges in Applied Intelligence Technologies. Studies in Computational Intelligence, Vol. 134, Springer-Verlag, ISBN 978-3-540-79354-0, pp. 289-298, 2008. | | 3) Panahi, H., Rabbani, M. and Tavakkoli-Moghaddam, R., A comparison of three meta-heuristics for a closed-loop layout problem with unequal-sized facilities, In: N.T. Nguyen and R. Katarzyniak (Eds.), New Challenges in Applied Intelligence Technologies. Studies in Computational Intelligence, Vol. 134, Springer-Verlag, ISBN 978-3-540-79354-0, pp. 265-278, 2008. | | 4) Tavakkoli-Moghaddam, R., Khalili, M. and Naderi, B., A variable neighborhood search method for a flowshop scheduling problem to minimize makespan, In: Sheibani, K. (ed.), Lecture Notes in Management Science, 2008, Vol. 1, pp. 62-71. | | 5) Tavakkoli-Moghaddam, R., Rahimi-Vahed, A. and Hossein-Mirzaei, A., Solving a multi-objective no-wait flow shop problem by a hybrid multi-objective immune algorithm, in: Levner, E. (Ed.), Multiprocessor Scheduling: Theory and Applications, I-Tech Education and Publishing, Vienna: Austria, ISBN 978-3-902613-02-8, 2007, pp. 195-214. | | 6) Tavakkoli-Moghaddam, R. and Safaei, N., A new mathematical model for flexible flow lines with blocking processor and sequence-dependent setup time, in: Levner, E. (Ed.), Multiprocessor Scheduling: Theory and Applications, I-Tech Education and Publishing, Vienna: Austria, ISBN 978-3-902613-02-8, 2007, pp. 256-272. | | 7) Mirghorbani, S.M, Rabbani, M., Tavakkoli-Moghaddam, R. and Rahimi-Vahed, A., A multi-objective particle swarm for a mixed-model assembly line sequencing, In: K.-H. Waldmann and U.M. Stocker (Eds.), Operations Research Proceedings 2006 - Part VI, Karlsruhe, Germany, September 6-8, 2006, ISBN 978-3-540-69994-1, pp. 181-186, DOI: 10.1007/978-3-540-69995-8_30. | | 8) Rabbani, M., Rahimi-Vahed, A., Javadi, B. and Tavakkoli-Moghaddam, R., A new approach for mixed-model assembly line sequencing, In: K.-H. Waldmann and U.M. Stocker (Eds.), Operations Research Proceedings 2006 - Part VI, Karlsruhe, Germany, September 6-8, 2006, ISBN 978-3-540-69994-1, pp. 169-174, DOI: 10.1007/978-3-540-69995-8_28. | | 9) Rahimi-Vahed, A., Rabbani, M., Tavakkoli-Moghaddam, R., Jolai, F. and Manavizadeh, N., Mixed-model assembly line sequencing using real options, In: K.-H. Waldmann and U.M. Stocker (Eds.), Operations Research Proceedings 2006 - Part VI, Karlsruhe, Germany, September 6-8, 2006, ISBN 978-3-540-69994-1, pp. 161-167, DOI: 10.1007/978-3-540-69995-8_27. | | 10) Tavakkoli-Moghaddam, R., Safaei, N. and Babakhani, M., Solving a dynamic cell formation problem with machine cost and alternative process plan by memetic algorithms, In: O. B. Lupanov, O.M. Kasim-Zade, A.V. Chaskin and K. Steinhofel (eds.), Stochastic algorithms: Foundation and Applications, Lecture Notes in Computer Science, Vol. 3777, Springer-Verlag, Berlin, 2005, 213-227, (IDS Number: BDQ12). | | ....................Journal Papers.................... | | 1) Tavakkoli-Moghaddam, R., Javadian, N., Khorrami, A. and Gholipour-Kanani, Y., Design of a scatter search method for a novel multi-criteria group scheduling problem in a cellular manufacturing system, Expert Systems with Applications, Vol. 37, No. 3, pp. 2661-2669, 2010. | | 2) Javadian, N., Gol Alikhani, M. and Tavakkoli-Moghaddam, R., Solving a single machine scheduling problem by a discrete version of electromagnetism-like method, J. of Circuits, Systems, and Computers, Vol. 18, No. 8, pp. 1597-1608, 2009. | | 3) Salehi, M. and Tavakkoli-Moghaddam, R., Application of genetic algorithm to computer-aided process planning in preliminary and detailed planning, Engineering Applications of Artificial Intelligence, Vol. 22, No. 8, pp. 1179-1187, 2009. | | 4) Seraj, O. and Tavakkoli-Moghaddam, R., A tabu serach method for a new bi-objective open shop scheduling problem by a fuzzy multi-objective decision making approach, Int. J. of Engineering, Transaction B: Application, Vol. 22, No. 3, pp. 269-282, 2009. | | 5) Tavakkoli-Moghaddam, R. and Aramon-Bajestani, M., A novel B&B algorithm for a unrelated parallel machine scheduling problem to minimize the total weighted tardiness, Int. J. of Engineering, Transaction A: Basic, Vol. 22, No. 3, pp. 269-286, 2009. | | 6) Safaei, N., Tavakkoli-Moghaddam, R. and Sassani, F., A series-parallel redundant reliability system for the cellular manufacturing design, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Vol. 223, No. 3, pp. 233-250, 2009. | | 7) Hassan-Pour, H.A., Mosadegh-Khah, M. and Tavakkoli-Moghaddam, R., Solving a multi-objective multi-depot stochastic location-routing problem by a hybrid simulated annealing algorithm, Proc. of Institute of Mechanical Engineering, Part B: J. of Engineering Manufacture, Vol. 223, No. B8, pp. 1045-1054, 2009. | | 8) Azaron, A., Ou Tang, O., Tavakkoli-Moghaddam, R., Dynamic lot sizing problem with continuous-time markovian production cost, Int. J. of Production Economics, Vol. 120, No. 2, pp. 607-612, 2009. | | 9) Safaei, N. and Tavakkoli-Moghaddam, R., Integrated multi-period cell formation and subcontracting production planning in dynamic cellular manufacturing systems, Int. J. of Production Economics, Vol. 120, No. 2, pp. 301-314, 2009. | | 10) Zaerpour, N., Rabbani, M., Gharehgozli, A.H. and Tavakkoli-Moghaddam, R., A comprehensive decision making structure for partitioning of make-to-order, make-to-stock and hybrid products, Soft Computing - A Fusion of Foundations, Methodologies and Applications, Vol. 13, No. 11, pp. 1035-1054, 2009. | | 11) Tavakkoli-Moghaddam, R., Safaei, N. and Azaron, A., Designing a fuzzy system for controlling the armament fire in dynamic siege, Expert Systems with Applications, Vol. 36, No. 9, pp. 11691-11698, 2009. | | 12) Gol-Alikhani, M., Javadian, N. and Tavakkoli-Moghaddam, R., A novel hybrid approach combining electromagnetism-like method with Solis and Wets local search for continuous optimization problems, J. of Global Optimization, Vol. 44, No. 2, pp. 227-234, 2009. | | 13) Safaei, N. and Tavakkoli-Moghaddam, R., An extended fuzzy parametric programming-based approach for designing cellular manufacturing systems under uncertainty and dynamic conditions, Int. J. of Computer Integrated Manufacturing, Vol. 22, No. 6, pp. 538-548, 2009. | | 14) Tavakkoli-Moghaddam, R., Taheri, F., Bazzazi, M., Izadi, M., Sassani, F., Design of a genetic algorithm for bi-objective unrelated parallel machines scheduling with sequence-dependent setup times and precedence constraints, Computers & Operations Research, Vol. 36, No. 12, pp. 3224-3230, 2009. | | 15) Naderi, B., Khalili, M. and Tavakkoli-Moghaddam, R., A hybrid artificial immune algorithm for a realistic variant of job shops to minimize the total completion time, Computers & Industrial Engineering, Vol. 56, No. 4, pp. 1494-1501, 2009. | | 16) Tavakkoli-Moghaddam, R., Naderi, B. and Khalili, M., A hybridization of simulated annealing and electromagnetic-like mechanism for job shop problems with machine availability and sequence-dependent setup times to minimize total weighted tardiness, Soft Computing - A Fusion of Foundations, Methodologies and Applications, Vol. 13, No. 10, pp. 995-1006. | | 17) Gharehgozli, A.H., Tavakkoli-Moghaddam, R. and Zaerpour, N., A fuzzy mixed-integer goal programming model for a parallel machine scheduling problem with sequence-dependent setup times and release dates, Robotics and Computer Integrated Manufacturing, Vol. 25, No. 4-5, pp. 853-859. | | 18) Eskandarzadeh, S., Tavakkoli-Moghaddam, R. and Azaron, A. An extension of the relaxation algorithm for solving a special case of capacitated arc routing problems, J. of Combinatorial Optimization, Vol. 17, No. 2, pp. 214-234, 2009. | | 19) Tavakkoli-Moghaddam, R., Rahimi-Vahed, A.R., Ghodratnama, A. and Siadat, Al., A simulated annealing method for solving a new mathematical model of a multi-criteria cell formation problem with capital constraints, Advances in Engineering Software, Vol. 40, No. 4, pp. 268-273, 2009. | | 20) Tavakkoli-Moghaddam, R., Makui, A., Salahi, S., Bazzazi, M., Taheri, F., An efficient algorithm for solving a new mathematical model for a quay crane scheduling problem in container ports, Computers & Industrial Engineering, Vol. 56, pp. 241-248, 2009. | | 21) Tavakkoli-Moghaddam, R., Safaei, N. and Sassani, F., A memetic algorithm for the flexible flow line scheduling problem with processor blocking, Computers and Operations Research, Vol. 36, No. 2, pp. 402-414, 2009. | | 22) Tavakkoli-Moghaddam, R., Ranjbar-Bourani, M., Mirzahosseinian, H. and Aryanezhad M.B., A new multi-objective model for a cell formation problem considering machine utilization and alternative process routes, Int. J. of Engineering, Transaction A: Basic, Vol. 22, No. 1, pp. 21-32, 2009. | | 23) Tavakkoli-Moghaddam, R., Sayarshad, H.R. and T.Y. ElMekkawy, T.Y., Solving a new multi-period mathematical model of the rail-car fleet size and car utilization by simulated annealing, Int. J. of Engineering, Transaction A: Basic, Vol. 22, No. 1, pp. 33-46, 2009. | | 24) Tavakkoli-Moghaddam, R. and Vasei, M., A single machine sequencing problem with idle insert: simulated annealing and branch-and-bound methods, Int. J. of Industrial Engineering and Operations Management, Vol. 19, No. 4, pp. 47-56, 2008 | | 25) Mehdizadeh, E., Sadi-Nezhad, S. and Tavakkoli-Moghaddam, R., Optimization of fuzzy clustering criteria by a hybrid PSO and fuzzy c-means clustering algorithm, Iranian J. of Fuzzy Systems, Vol. 5, No. 3, pp. 1-14, 2008. | | 26) Tavakkoli-Moghaddam, R., Aryanezhad, M.B., Kazemipoor, H. and Salehipour, A., Partitioning machines in tandem AGV systems based on “balanced flow strategy” by simulated annealing, Int. J. of Advanced Manufacturing Technology, Vol. 38, Nos. 3-4, pp. 355-366, 2008. | | 27) Seifi, M. and Tavakkoli-Moghaddam, R., A new bi-objective model for a multi-mode resource-constrained project scheduling problem with discounted cash flows and four payment models, Int. J. of Engineering, Transaction A: Basic, Vol. 21, No. 4, pp. 347-360, 2008. | | 28) Tavakkoli-Moghaddam, R., Taheri, F. and Bazzazi, M., Multi-objective unrelated parallel machines scheduling with sequence-dependent setup times and precedence constraints, Int. J. of Engineering, Transaction A: Basic, Vol. 21, No. 3, pp. 269-278, 2008. | | 29) Tavakkoli-Moghaddam, R., Aryanezhad, M.B., Kazemipoor, H. and Salehipour, A., A threshold accepting algorithm for partitioning machines in a tandem automated guided vehicle, IUST - Int. J. of Engineering Science, Vol. 19, No. 1-2, pp. 33-42, 2008. | | 30) Rabbani, M., Tavakkoli-Mogahddam, R. and Parsa, H., A mathematical model for a distribution network problem in a multi-product supply chain system: A real case study, Int. J. of Manufacturing and Technology Management, Vol. 15, No. 1, pp. 1-11, 2008. | | 31) Rahimi-Vahed, A.R., Javadi, B., Rabbani, M. and Tavakkoli-Moghaddam, R., A multi-objective scatter search for a bi-criteria no-wait flow shop scheduling problem, J. of Engineering Optimization, Vol. 40, No. 4, pp. 331-346, 2008. | | 32) Tavakkoli-Mogahddam, R., Safaei, N. and Kah, M.M.O., Accessing feasible space in a generalized job shop scheduling problem with the fuzzy processing times: A fuzzy-neural approach, J. of the Operational Research Society, Vol. 59, pp. 431-442, 2008. | | 33) Tavakkoli-Moghaddam, R., Safaei, N. and Sassani, F., A new solution for a dynamic cell formation problem with alternative routing and machine costs using simulated annealing, Journal of the Operational Research Society, Vol. 59, pp. 443-454, 2008. | | 34) Tavakkoli-Moghaddam, R., Rahimi-Vahed, A.R. and Mirzaei, A.H., Solving a multi-objective no-wait flow shop scheduling problem by an immune algorithm, Int. J. of Advanced Manufacturing Technology, Vol. 36, Nos. 9-10, pp. 969-981, 2008. | | 35) Zaerpour, N., Rabbani, M., Gharehgozli, A.H. and Tavakkoli-Moghaddam, R., Make-to-order or make-to-stock decision by a novel hybrid approach, Advanced Engineering Informatics, Vol. 22, Issue 2, 2008, pp. 186-201. | | 36) Tavakkoli-Moghaddam, R., Gholipour-Kanani, Y. and Cheraghalizadeh, R. A genetic and memetic algorithm approach to sequencing and scheduling of cellular manufacturing systems, Int. J. of Management Science and Engineering Management, Vol. 3, No. 2, pp. 119-130, 2008. | | 37) Ebadian, M., Rabbani, M., Jolai, F., Torabi, S.A. and Tavakkoli-Moghaddam, R., A new decision-making structure for the order entry stage in make-to-order environments, Int. J. of Production Economics, Vol. 111, pp. 351-367, 2008. | | 38) Tavakkoli-Moghaddam, R., Minaeian, S. and Rabbani, M., A new multi-objective model for dynamic cell formation problem with fuzzy parameters, Int. J. of Engineering, Transaction A: Basic, Vol. 21, No. 2, pp. 159-172, 2008. | | 39) Tavakkoli-Moghaddam, R., Safari J. and Sassani, F., Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm, Reliability Engineering and System Safety, Vol. 93, No. 4, pp. 550-556, 2008. | | 40) Safaei, N., Saidi-Mehrabad, M., Tavakkoli-Moghaddam, R. and Sassani, F., A fuzzy programming approach to a cell formation problem with dynamic and uncertain conditions, Fuzzy Sets and Systems, Vol. 159, No. 2, pp. 215-236, 2008. | | 41) Razmi, J., Tavakkoli-Moghaddam, R., Zairi, M. and Mousavi, N., Application of TOPSIS, AHP and GIS in a multi-attribute model to solve location problem for bank branches - An empirical study in Iran, Int. J. of Excellence in Public Sector Management, Vol. 1, No. 2, pp. 21-34, 2007. | | 42) Tavakkoli-Moghaddam, R., Aryanezhad, M.B., Safaei, N., Vasei, M., Azaron, A., A new approach for the cellular manufacturing problem in fuzzy dynamic conditions by a genetic algorithm, J. of Intelligent & Fuzzy Systems, Vol. 18, No. 4, pp. 363-376, 2007. | | 43) Tavakkoli-Moghaddam, R., Rahimi-Vahed, A. and Hossein-Mirzaei, A., A hybrid multi-objective immune algorithm for a flow shop scheduling problem with bi-objectives: Weighted mean completion time and weighted mean tardiness, Information Sciences, Vol. 177, No. 22, pp. 5072-5090, 2007. | | 44) Kaboli, A. Aryanezhad, M.B., Shahanaghi, K. and Tavakkoli-Moghaddam, R., A holistic approach based on MCDM for solving location problems, Int. J. of Engineering, Transaction A: Basic, Vol. 20, No. 3, pp. 251-262, 2007. | | 45) Tavakkoli-Moghaddam, R. and Mehdizadeh, E., A new ILP model for identical parallel-machine scheduling with family setup times minimizing the total weighted flow time by a genetic algorithm, Int. J. of Engineering, Transaction A: Basic, Vol. 20, No. 2, pp. 183-194, 2007. | | 46) Tavakkoli-Moghaddam, R. and Safari, J., A new mathematical model for a redundancy allocation problem with mixing components redundant and choice of redundancy strategies, Applied Mathematical Sciences, Vol. 1, No. 45, pp. 2221-2230, 2007. | | 47) Tavakkoli-Moghaddam, R., Safaei, N., Kah, M.M.O. and Rabbani, M., A new capacitated vehicle routing problem with split service for minimizing fleet cost by simulated annealing, J. of the Franklin Institute, Vol. 344, No. 5, pp. 406-425, 2007. | | 48) Azaron, A., Sakawa, M., Tavakkoli-Moghaddam, R. and Safaei, N., A discrete-time approximation technique for the time-cost trade-off in PERT networks, RAIRO - Operations Research, Vol. 41, No. 1, pp. 61-81, 2007. | | 49) Azaron, A., Tavakkoli-Moghaddam, R., Multi-objective time-cost trade-off in dynamic PERT networks using an interactive approach, Eur. J. of Operational Research, Vol. 180, No. 3, pp. 1186-1200, 2007. | | 50) Rahimi-Vahed, A.R., Rabbani, M., Tavakkoli-Moghaddam, R., Torabi, S.A. and Jolai, F., A multi-objective scatter search for a mixed-model assembly line sequencing problem, Advanced Engineering Informatics, Vol. 21, Issue 1, pp. 85-99, 2007. | | 51) Tavakkoli-Moghaddam, R., Javadian, N., Javadi, B. and Safaei, N., Design of a facility layout problem in cellular manufacturing systems with stochastic demands, Applied Mathematics and Computation, Vol. 184, Issue 2, pp. 721-728, 2007. | | 52) Tavakkoli-Moghaddam, R., Jolai, F., Khodadadeghan, Y. and Haghnevis, M., A mathematical model of a multi-criteria parallel machine scheduling problem: a genetic algorithm, Int. J. of Engineering, Transactions A: Basic, Vol. 19, No. 1, pp. 79-86, 2006. | | 53) Tavakkoli-Moghaddam, R., Javadi, B., Jolai, F. and Mirghorbani, S.M., An efficient algorithm to inter and intra-cell layout problems in cellular manufacturing systems with stochastic demands, Int. J. of Engineering, Transactions A: Basic, Vol. 19, No. 1, pp. 67-78, 2006. | | 54) Rabbani, M., Tavakkoli-Moghaddam, R., Jolai, F. and Ghorbani, H.R., A comprehensive model for R&D project portfolio selection with zero-one linear goal-programming, Int. J. of Engineering, Transactions A: Basic, Vol. 19, No. 1, pp. 55-66, 2006. | | 55) Tavakkoli-Moghaddam, R. and Rahimi-Vahed, A.R., Multi-criteria sequencing problem for a mixed-model assembly line in a JIT production system, Applied Mathematics and Computation, Vol. 181, Issue 2, 2006, pp. 1471-1481. | | 56) Tavakkoli-Moghaddam, R., Saremi, A.R. and Ziaee, M.S., A memetic algorithm for a vehicle routing problem with backhauls, Applied Mathematics and Computation, Vol. 181, Issue 2, pp. 1049-1060, 2006. | | 57) Azaron, A. and Tavakkoli-Moghaddam, R., A multi-objective resource allocation problem in dynamic PERT networks, Applied Mathematics and Computation, Vol. 181, Issue 1, pp. 163-174, 2006. | | 58) Jolai, F., Tavakkoli-Moghaddam, R., Rabbani, M. and Sadoughian, M.R., An economic production lot size model with deteriorating items, stock-dependent demand, inflation, and partial backlogging, Applied Mathematics and Computation, Vol. 181, Issue 1, pp. 380-389, 2006. | | 59) Tavakkoli-Moghaddam, R., Safaei, N. and Gholipour, Y., A hybrid simulated annealing for capacitated vehicle routing problems with the independent route length, Applied Mathematics and Computation, Vol. 176, Issue 2, pp. 445-454, 2006. | | 60) Tavakkoli-Moghaddam, R., Javadi, B. and Safaei, N., Solving a mixed-integer model of a single machine scheduling problem by a fuzzy goal programming approach, WSEAS Transactions on Business and Economics, Vol. 3, Issue 2, pp. 45-52, 2006. | | 61) Tavakkoli-Moghaddam, R., Moslehi, G., Vasei, M. and Azaron, A., A branch-and-bound algorithm for a single machine sequencing to minimize the sum of maximum earliness and tardiness with idle insert, Applied Mathematics and Computation, Vol. 174, Issue 1, pp. 388-408, 2006. | | 62) Tavakkoli-Moghaddam, R. and Safaei, N., Solving a generalized aggregate production planning problem by genetic algorithms, J. of Industrial Engineering - Int., Vol. 2, No. 1, 53-64, 2006. | | 63) Towhidi, N., Tavakkoli-Moghaddam, R. and Vahdat, S.E., The use of fuzzy logic theory for selecting appropriate tool steels with price analysis, Iranian J. of Science & Technology, Transaction B: Engineering, Vol. 29, No. B6, 559-567, 2005. | | 64) Tavakkoli-Moghaddam, R., Moslehi, G., Vasei, M. and Azaron, A., Optimal scheduling for a single machine to minimize the sum of maximum earliness and tardiness considering idle insert, Applied Mathematics and Computation, Vol. 167, Issue 2, pp. 1430-1450, 2005. | | 65) Tavakkoli-Moghaddam, R. and Daneshamnd-Mehr, M., A computer simulation model for job shop scheduling problems minimizing the makespan, Computers and Industrial Engineering, Vol. 48, No. 4, pp. 811-826, 2005. | | 66) Tavakkoli-Moghaddam, R., Jolai, F., Vaziri, F. Ahmed, P.K. and Azaron, A., A hybrid method for solving stochastic job shop scheduling problems, Applied Mathematics and Computation, Vol. 170, Issue 1, pp. 185-206, 2005. | | 67) Tavakkoli-Moghaddam, R., Aryanezhad, M.B., Safaei, N. and Azaron, A., Solving a dynamic cell formation problem using metaheuristics, Applied Mathematics and Computation, Vol. 170, Issue 2, pp. 761-780, 2005. | | 68) Tavakoli-Moghadam, R., Rabbani, M., Ghodratnama, A. and Ahmed, P.K., Allocation of parts to cells minimizing tardiness and idle time by simulated annealing, Int. J. of Manufacturing Technology and Management, Vol. 7, Nos. 5/6, pp. 581-593, 2005. | | 69) Tavakkoli-Moghaddam, R., Razmi, J., Ghaffari, M. and Ghodratnama, A., Assessment of benchmarking method in a car part production industry, IUST - Int. J. of Engineering Science, Vol. 16, No. 1, pp. 125-133, 2005. | | 70) Tavakkoli-Moghaddam, R., Safaei, N. and Shariat M.A., A multi-criteria vehicle routing problem with soft time windows by simulated annealing, J. of Industrial Engineering - Int., Vol. 1, No. 1, 28-36, 2005. | | 71) Tavakoli-Moghadam, R., Rabbani, M., Godratnama, A. and Safaei, N., An efficient algorithm to allocate parts to cells minimizing total tardiness and idle times, Int. J. of Engineering, Transactions B: Applications, Vol. 17, No. 4, pp. 375-382, 2004. | | 72) Tavakkoli-Moghaddam, R., Azaron, M. and Mehrad-Pay, L. Optimal control of service rate in a service center with Lapse, Int. J. of Engineering, Transactions B: Applications, Vol. 17, No. 3, pp. 289-298, 2004. | | 73) Tavakkoli-Moghaddam, R., Azaron, M. and Mehrad-Pay, L. Optimal control of service rate in a service center, Int. J. of Applied Mathematics, Vol. 13, No. 2, pp. 137-153, 2003. | | 74) Tavakkoli-Mogahddam, R., A continuous plane model to machine layout problems considering pick-up and drop-off points: an evolutionary algorithm, Int. J. of Engineering, Vol. 16, No. 1, 2003, pp. 59-70. | | 75) Tavakkoli-Moghaddam, R., Mathematical programming models for solving unequal-sized facilities layout problems: A genetic search method, Int. J. of Engineering, Vol. 12, No. 4, pp. 233-245, 1999. | | 76) Tavakkoli-Moghaddam, R. and Shayan, E., Facilities layout design by genetic algorithms, Int. J. of Computers and Industrial Engineering, Vol. 35, Nos 3-4, pp. 527-530, 1998. | | ....................Conference Papers.................... | | 1) Tavakkoli-Moghaddam, R., Mojtahedi, S.M.H., Mousavi, S.M. and Aminian, A., A jackknife technique to estimate the standard deviation in a project risk, severity data analysis, Proc. of the 39th Int. Conf. on Computers & Industrial Engineering (CIE39), Troyes, France, July 6-8, 2009, pp. 1337-1341. | | 2) Malekly, H., Haddadi, B. and Tavakkoli-Moghadam, R., A fuzzy random vehicle routing problem: The case of Iran, Proc. of the 39th Int. Conf. on Computers & Industrial Engineering (CIE39), Troyes, France, July 6-8, 2009, pp. 1082-1087. | | 3) Seraj, O., Tavakkoli-Moghaddam, R. and Jolai, F., A fuzzy multi-objective tabu-search method for a new bi-objective open shop scheduling problem, Proc. of the 39th Int. Conf. on Computers & Industrial Engineering (CIE39), Troyes, France, July 6-8, 2009, pp. 164-169. | | 4) Aramon Bajestani, M. and Tavakkoli-Moghaddam, R., A new branch-and-bound algorithm for the unrelated parallel machine scheduling problem with sequence-dependent setup times, Proc. of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM), Moscow, Russia, June 3 - 5, 2009, pp. 796-801. | | 5) Rezaie, N., Tavakkoli-Moghaddam, R. and Torabi, S.A., A new mathematical model for fuzzy flexible flow shop scheduling of unrelated parallel machines maximizing the weighted satisfaction level, Proc. of the 13th IFAC Symposium on Information Control Problems in Manufacturing (INCOM), Moscow, Russia, June 3 - 5, 2009, pp. 802-807. | | 6) Pirayesh-Neghab, A.E., Tavakkoli-Moghaddam, R. and Ziaei, B., Designing a single loop in block layouts for AGV, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 341-344. | | 7) Tabrizi, B.H., Tavakkoli-Moghaddam, R. and Khakzad, M., CMS scheduling with setup times: A goal-programming approach, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 337-340. | | 8) Tavakkoli-Moghaddam, R., Gholipour-Kanani, Y. and Cheraghalizadeh, R. Multi-objective optimization to sequencing and scheduling of cellular manufacturing systems, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 282-285. | | 9) Ghotboddini, M.M., Tavakkoli-Moghaddam, R. and Feizollahi, M.J., Machine utilization in a new multi-objective dynamic cell formation design, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 345-348. | | 10) Mardan, A. and Tavakkoli-Moghaddam, R., Multi-objective vehicle routing problem with time window, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 303-306. | | 11) Mehdizadeh, E. and Tavakkoli-Moghaddam, R., Vibration damping optimization algorithm for an identical parallel machines scheduling problem, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 216-219. | | 12) Shamekhi, A., Tavakkoli-Moghaddam, R. and Javadi, B., A VNS method for multi-period cell formation and layout problems, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 190-193. | | 13) Tavakkoli-Moghaddam, R., Sotoudeh, A. and Manzour-al-Ajdad, S.M.H., A new p-hub location model for medical emergency situations, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 333-336. | | 14) Rafiee, K., Tavakkoli-Moghaddam, R. and Zohrevand, A.M., A new periodic vehicle routing problem by particle swarm optimization, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 265-268. | | 15) Kia, R., Tavakkoli-Moghaddam, R. and Kazemi, M., Layout design of cellular manufacturing systems with alternative process routing and machines assignment in given locations, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, 257-260. | | 16) Gholipour-Kanani, Y., Tavakkoli-Moghaddam, R. and Cheraghalizadeh, R., Proposed two heuristic algorithms to sequencing and scheduling of job-shop problem, Proc. of the 2nd Int. Conf. of Iranian Operations Research Society, Babolsar, Iran, May 20-22, 2009, pp. 274-277. | | 17) Safari, J. and Tavakkoli-Moghaddam, R., A genetic algorithm for a redundancy allocation problem with the choice of redundancy strategies, Proc. of the 6th Int. Industrial Engineering Conf., Tehran, Iran, February 18-19, 2009. | | 18) Amoozad-Khalili, H., Tavakkoli-Moghaddam, R. and Ranjbar-Bourani, M., The use of RFID technology in inventory management and improvement of supply chain, Proc. of the 5th Int. Information and Telecommunication Management (ICTM 2009), Tehran, Iran, February 17-18, 2009. | | 19) Ahmady, A., Moini, A. and Tavakkoli-Moghaddam, R., Discussion on bargaining region in oil trade negotiations using type-2 fuzzy sets, Proc. of World Academy of Science, Engineering and Technology (WCSET), Vol. 37, Dubai, United Arab Emirates, January 28-30, 2009, pp. 1349-1353. | | 20) Pourghaderi, A.R., Tavakkoli-Moghaddam, R., Alinaghian, M. and Beheshti-Pour, B., A simple and effective heuristic for periodic vehicle routing problem, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2008), M. Helander, M. Xie, R. Jiao and R. Jiao (Eds.), Singapore, December 8-11, 2008, pp. 133-137. | | 21) Tavakkoli-Moghaddam, R., Panahi, H. and Heydar, M., Minimization of weighted tardiness and makespan in an open shop environment by a novel hybrid multi-objective meta-heuristic method, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2008), M. Helander, M. Xie, R. Jiao and R. Jiao (Eds.), Singapore, December 8-11, 2008, pp. 379-383. | | 22) Heydar, M., Tavakkoli-Moghaddam, R., Mousavi, S.M. and Mojtahedi, S.M.H., Fuzzy multi criteria decision making method for temporary storage design in industrial plants, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2008), M. Helander, M. Xie, R. Jiao and R. Jiao (Eds.), Singapore, December 8-11, 2008, pp. 1154-1158. | | 23) Tavakkoli-Moghaddam, R., Torabi, S.A. and Aramoon- Bajestani, M., A possibilistic programming approach for multi-objective unrelated parallel machines scheduling, Proc. of the 6th Int. Symposium on Intelligent and Manufacturing Systems, Sakarya, Turkey, October 14-16, 2008, pp. 972-982. | | 24) Hassan-Pour, H.A., Mosadegh-Khah, M. and Tavakkoli-Moghaddam, R., An integrated location-routing problem in a stochastic environment by a hybrid simulated annealing, Proc. of the 6th Int. Symposium on Intelligent and Manufacturing Systems, Sakarya, Turkey, October 14-16, 2008, pp. 552-558. | | 25) Tavakkoli-Moghaddam, R. and Amin-Tahmasbi, H., A bi-criteria flowshop scheduling problem with sequence-dependent setup times to minimize the total completion time and the total earliness and tardiness, Proc. of the 6th Int. Symposium on Intelligent and Manufacturing Systems, Sakarya, Turkey, October 14-16, 2008, pp. 955-960. | | 26) Tavakkoli-Moghaddam, R. and Sayarshad, H.R., A new hybrid approach for a multi-objective open-shop scheduling problem to minimize the costs and makespan, Proc. of the 6th Int. Symposium on Intelligent and Manufacturing Systems, Sakarya, Turkey, October 14-16, 2008, pp. 961-971. | | 27) Tavakkoli-Moghaddam, R., Siadat, A. and Kaboli, A., A decision framework for location-allocation problems: A case study in Tea Industry, Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology, Bangkok, Thailand, 21-24 Sep. 2008, pp. 1061-1065. | | 28) Panahi, H., Rabbani, M. and Tavakkoli-Moghaddam, R., A multi-objective particle swarm optimization for an open shop scheduling problem minimizing the total flow time and weighted tardiness, Proc. of the Int. Conf. on Operations Research 2008, Augsburg, Germany, 3-5 September 2008. | | 29) Mehdizadeh, E. and Tavakkoli-Moghaddam, R., Vibration damping optimization, Proc. of the Int. Conf. on Operations Research 2008, Augsburg, Germany, 3-5 September 2008. | | 30) Malekly, H., Tavakkoli-Moghaddam, R. and Panahi, H., A mathematical model for a multi- objective dynamic multi-Commodity capacitated facility location problem with CVaR criterion, Proc. of the Int. Conf. on Operations Research 2008, Augsburg, Germany, 3-5 September 2008. | | 31) Tavakkoli-Moghaddam, R. and Javadi, B., Solving a bi-objective no-wait flow shop scheduling problem by a fuzzy goal programming approach, In: Manufacturing Fundamentals: Necessity and Sufficiency, Chapter 16, Modeling: Scheduling and Project Management, (Presented at the 3rd Int. Conf. on Production and Operations Management, Tokyo, Japan, 3-5 August 2008), pp. 2325-2336. | | 32) Tavakkoli-Moghaddam, R., Malekly, H. and Saati, S., Modeling a hybrid DEA method for a dynamic multi-commodity capacitated facility location problem, In: Manufacturing Fundamentals: Necessity and Sufficiency, Chapter 19, Modeling: Logistics and Physical Distribution, (Presented at the 3rd Int. Conf. on Production and Operations Management, Tokyo, Japan, 3-5 August 2008), pp. 2662-2674. | | 33) Panahi, H., Tavakkoli-Moghaddam, R. and Torabi, S.A., Solving an open shop scheduling problem by a multi-objective immune algorithm, In: Manufacturing Fundamentals: Necessity and Sufficiency, Chapter 16, Modeling: Scheduling and Project Management, (Presented at the 3rd Int. Conf. on Production and Operations Management, Tokyo, Japan, 3-5 August 2008), pp. 2337-2350. | | 34) Mojibi, T., Tabari, M. and Tavakkoli-Moghaddam, R., An integrated BSC model for the performance evaluation of public organizations, In: Manufacturing Fundamentals: Necessity and Sufficiency, Chapter 10, Environmental and Sustainable Management, (Presented at the 3rd Int. Conf. on Production and Operations Management, Tokyo, Japan, 3-5 August 2008), pp. 1704-1718. | | 35) Tavakkoli-Moghaddam, R., Sheikh-Sajadieh, M., Mojibi, T. and Tabari, M., An inventory model for deteriorating items under stochastic supply lead-time, In: Manufacturing Fundamentals: Necessity and Sufficiency, Chapter 15, Modeling: Inventory Management, (Presented at the 3rd Int. Conf. on Production and Operations Management, Tokyo, Japan, 3-5 August 2008), pp. 2176-2184. | | 36) Panahi, H. and Tavakkoli-Moghaddam, R., Solving an open Shop scheduling problem by a novel hybrid multi-objective ant colony optimization, In: Xhafa, F., Herrera, F., Abraham, A., Köppen, M. and Bénitez, J.M., (Eds.), Proc. of the 8th Int. Conf. on Hybrid Intelligent Systems, Barcelona, Spain, September 10-12, 2008, Published by IEEE Computer Society. | | 37) Mauchand, M., Kaboli, A., Siadat, A. and Tavakkoli-Moghaddam, R., A hybrid decision making approach for value chain analysis?, Proc. of the 20th Int. Conf. on Systems Research, Informatics and Cybernetics, Baden-Baden, Germany, 24-30 July 2008. | | 38) Salehi, M. and Tavakkoli-Moghaddam, R., Project selection by using a fuzzy TOPSIS technique, Proc. of World Academy of Science, Engineering and Technology (WCSET), 4-6 July 2008, Paris, France, ISSN: 1307-6884, ,Vol. 30, pp. 85-90, 2008. | | 39) Tavakkoli-Moghaddam, R. and Hassanzadeh-Amin S., A decision support system for facility location selection based on a fuzzy house of quality method, Proc. of the 10th Int. Conf. on Enterprise Information Systems (ICEIS), Barcelona, Spain, June 12-16, 2008, pp. 403-406. | | 40) Panahi, H. and Tavakkoli-Moghaddam, R., An efficient hybrid method for clustering problems, Proc. Of the 10th Int. Conf. on Enterprise Information Systems (ICEIS), Barcelona, Spain, June 12-16, 2008, pp. 228-294. | | 41) Minaeian, S. and Tavakkoli-Moghaddam, R., Designing a multi-objective model for a cell formation problem under dynamic and fuzzy conditions, Proc. of the Conference on Optimization: Techniques and Applications (ICOTA7), Kobe, Japan, December 12-15, 2007. | | 42) Rezaei, M. and Tavakkoli-Moghaddam, R., A mathematical model for scheduling flexible flow lines with limited intermediate buffers and sequence-dependent setup times, Conference on Optimization: Techniques and Applications (ICOTA7), Kobe, Japan, December 12-15, 2007. | | 43) Tavakkoli-Moghaddam, R. and Panahi, H., Solving a new mathematical model of a closed-loop layout problem with unequal-sized facilities by a genetic algorithm, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2007), M. Helander, M. Xie, R. Jiao and K.C. Tan (Eds.), Singapore, December 2-5, 2007, pp. 327-331. | | 44) Tavakkoli-Moghaddam, R., Bozorgzad, A.A. and Gholipour-Kanani, Y., The use of a memetic algorithm in operations scheduling of cellular manufacturing systems with makespan, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2007), M. Helander, M. Xie, R. Jiao and K.C. Tan (Eds.), Singapore, December 2-5, 2007, pp. 1120-1124. | | 45) Tavakkoli-Moghaddam, R., Rabbani, M., Gharehgozli, A.H. and Zaerpour, N., A fuzzy aggregate production planning model for make-to-stock environments, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2007), M. Helander, M. Xie, R. Jiao and K.C. Tan (Eds.), Singapore, December 2-5, 2007, pp. 1609-1613. | | 46) Mehdizadeh, E. and Tavakkoli-Moghaddam, R., A hybrid fuzzy clustering PSO algorithm for a clustering supplier problem, Proc. of the IEEE Int. Conf. on Industrial Engineering and Engineering Management (IEEM 2007), M. Helander, M. Xie, R. Jiao and K.C. Tan (Eds.), Singapore, December 2-5, 2007, pp. 1466-1470. | | 47) Tavakkoli-Moghaddam, R., Pourghaderi, A.R. and Alinagian, M., A new heuristic algorithm for periodic vehicle routing problems, Int. Annual Scientific Conf. on Operations Research in the Service Industry, Saarland: Germany, September 5-7, 2007. | | 48) Eskandarzadeh, S. and Tavakkoli-Moghaddam, R., An extension of the relaxation algorithm for solving a special case of capacitated arc routing problems, Proceeding of the 5th Int. Conf. on Industrial Engineering, Tehran: Iran, July 10-11, 2007. | | 49) Tavakkoli-Moghaddam, R., Safaei, N. and Sassani, F., Particle swarm optimization for redundant reliability problems with multiple component choice, Proceeding of the 7th Metaheuristics Int. Conf. (MIC 2007), Montreal: Canada, June 25-29, 2007. | | 50) Tavakkoli-Moghaddam, R., Gharehgozli, A.H., Rabbani, M. and Zaerpour, N., A fuzzy mixed-integer goal programming model for a parallel machine scheduling problem, Proceeding of the 8th WSEAS Int. Conf. on Fuzzy Systems (FS "07), Vancouver: Canada, June 19-21, 2007, pp. 196-201. | | 51) Gharehgozli, A.H., Tavakkoli-Moghaddam, R., Rabbani, M. and Zaerpour, N., Acceptance or rejection of incoming orders by a fuzzy analytical hierarchy process in make-to-order environments, Proceeding of the 8th WSEAS Int. Conf. on Fuzzy Systems (FS "07), Vancouver: Canada, June 19-21, 2007, pp. 202-207. | | 52) Tavakkoli-Moghaddam, R., Bagherpour, M., Noora, A.A. and Sassani, F., Application of fuzzy lead time to a material requirement planning system, Proceeding of the 8th WSEAS Int. Conf. on Fuzzy Systems (FS "07), Vancouver: Canada, June 19-21, 2007, pp. 208-213. | | 53) Azadeh, A., Tavakkoli-Moghaddam, R. and Tarverdian, S., Electrical energy consumption estimation by genetic algorithm and analysis of variance, Proceedings of the Int. Conf. on Renewable Energies and Power Quality (ICREPQ`07), Sevilla: Spain, March 28-30, 2007. | | 54) Tavakkoli-Moghaddam, R., Rahimi-Vahed, A.R. and Mirzaei, A.H., Solving a bi-criteria permutation flow shop problem using immune algorithm, Proceedings of the First IEEE Symposium on Computational Intelligence in Scheduling (CI-Sched 2007 a part of the IEEE SSCI 2007), Honolulu: Hawaii, April 1-5, 2007, IEEE Computer Society Press, pp. 49-56. | | 55) Azadeh, A., Gaderi, S.F., Tavakkoli-Moghaddam, R., Tarverdian, S. and Saberi, M., Integration of artificial neural networks and genetic algorithm to predict electrical energy consumption in energy intensive sector, Proceeding of the First Int. Conf. on E-Learning in Industrial Electronics (ICELIE"06), Hammamet: Tunisia, December 18-20, 2006. | | 56(Amlah, A., Towhidi, N. and Tavakkoli-Moghaddam, R., S.A. Vahdat, Application of the fuzzy logic for determining strategic metals in Iran, Proceeding of the Int. Conf. on Problem Solving Strategies and Techniques (PSST 2006), Tehran: Iran, November 26-27, 2006. | | 57) Tavakkoli-Moghaddam, R. and Rahimi-Vahed, A.R., A memetic algorithm for multi-criteria sequencing problem for a mixed-model assembly line in a JIT production system, Proceedings of the IEEE Congress on Evolutionary Computation (CEC 2006), Edited by G.G. Yen, S.M. Lucas, G. Fogel, G. Kendall, R. Salomon, y.-T. Zhang, C.A. Coello and T.P. Runarsson, Vancouver: Canada, July 16-21, 2006, pp. 2993- 2998, IEEE Computer Society Press, ISBN: 0-7803-9487-9. | | 58) Tavakkoli-Moghaddam, R. and Safaei, N., An evolutionary algorithm for a single-item resource-constrained aggregate production planning problem, Proceedings of the IEEE Congress on Evolutionary Computation (CEC 2006), Edited by G.G. Yen, S.M. Lucas, G. Fogel, G. Kendall, R. Salomon, Y.-T. Zhang, C.A. Coello and T.P. Runarsson, Vancouver: Canada, July 16-21, 2006, pp. 2851- 2858, IEEE Computer Society Press, ISBN: 0-7803-9487-9. | | 59) Tavakkoli-Moghaddam, R., Ale-Ebrahim, N., Golnam, A., Vasei, M. and Ghazizadeh-Moghaddam, A., Analysis of opportunities and challenges for R&D management and the role of the R&D society for its improvement - A case study in Iran, Proceeding of the R&D Management Conf., Lake Windermere: England, July 5-7, 2006, | | 60) Tavakkoli-Moghaddam, R. and Safaei, N., A generalized dynamic cell formation problem with fuzzy demand and unreliable facilities, Proceeding of the 3rd Int. Conf. on Group Technology / Cellular Manufacturing, Groningen: Netherlands, July 3-5, 2006, pp. 349-356. | | 61) Safaei, N. and Tavakkoli-Moghaddam, R., Reliability consideration in a cell formation problem with parallel-series configuration, Proceeding of the 3rd Int. Conf. on Group Technology / Cellular Manufacturing, Groningen: Netherlands, July 3-5, 2006, pp. 36-43. | | 62) Javadian, N., Javadi, B., Tavakkoli-Moghaddam, R. and Safaei, N., Possibility linear programming to uniform parallel machines scheduling with sequence-dependent setup times: early/tardy penalties, Proceeding of the 36th Int. Conf. on Computers and Industrial Engineering, Taipei: Taiwan, June 20-23, 2006, pp. 3488-3497. | | 63) Saidi-Mehrabad, M., Safaei, N. and Tavakkoli-Moghaddam, R., A fuzzy parametric programming for cell formation problem in uncertainty and dynamic conditions, Proceeding of the 36th Int. Conf. on Computers and Industrial Engineering, Taipei: Taiwan, June 20-23, 2006, pp. 2703-2713. | | 64) Tavakkoli-Moghaddam, R., Javadi, B. and Safaei, N., A fuzzy goal programming approach for a single machine scheduling problem, Proceeding of the 9th WSEAS Int. Conf. on Applied Mathematics, Istanbul: Turkey, May 27-29, 2006, pp. 140-145. | | 65) Gharehgozli, A.H., Rabbani, M. and Tavakkoli-Moghaddam, R., A proposed hierarchical production planning structure for combined MTS/MTO environments, Proceeding of the 9th WSEAS Int. Conf. on Applied Mathematics, Istanbul: Turkey, May 27-29, 2006, pp. 146-151. | | 66) Tavakkoli-Moghaddam, R., Khodadadegan, Y. and Haghnevis M., Efficient algorithm for a multi-criteria parallel machine scheduling problem with sequence-dependent setup times, Proceeding of the 5th Int. Symposium on Intelligent Manufacturing Systems, Sakarya: Turkey, May 29-31, 2006, pp. 159-167. | | 67) Safaei, N. and Tavakkoli-Moghaddam, R., The use of genetic algorithms for multi-mode resource-constrained project planning with the diminishing returns, Proceeding of the 5th Int. Symposium on Intelligent Manufacturing Systems, Sakarya: Turkey, May 29-31, 2006, pp. 216-226. | | 68) Tavakkoli-Moghaddam, R. and Safaei, N., Modeling flexible flow lines with blocking and sequence dependent setup time, Proceeding of the 5th Int. Symposium on Intelligent Manufacturing Systems, Sakarya: Turkey, May 29-31, 2006, pp. 149-158. | | 69) Safaei, N., Tavakkoli-Moghaddam, R. and Jabal-Ameli, S.M., A generalized cell formation problem in dynamic environment with different inter and intra-cell batch sizes, Proceeding of the 12th IFAC Symposium on Information Control problems in Manufacturing, Saint Etienne: France, May 15-19, 2006, Vol. 2, pp. 401-406. | | 70) Tavakkoli-Moghaddam, R., Safaei, N. and Torabi, S.A., Scheduling of flexible flow lines with blocking by memetic algorithms, Proceeding of the 12th IFAC Symposium on Information Control problems in Manufacturing, Saint Etienne: France, May 15-19, 2006, Vol. 3, pp. 21-26. | | 71) Torabi, S.A., Jenabi, M., Fatemi Ghomi, S.M.T., Jolai, F. and Tavakkoli-Moghaddam, R., Finite horizon ELSP in flexible flow lines with unrelated parallel machines, Proceeding of the 12th IFAC Symposium on Information Control problems in Manufacturing, Saint Etienne: France, May 15-19, 2006, Vol. 4, pp. 137-142. | | 72) Tavakkoli-Moghaddam, R., Safaei, N. and Bidgoli-Kashani, S., Modeling diminishing returns in multi-mode resource-constrained project planning by genetic algorithm, Proceeding of the 4th Int. Conf. on Industrial Engineering, Tarbiat Modares University, Tehran, 11-12 December, 2005. | | 73) Tavakkoli-Moghaddam, R. and Safaei, N., A genetic algorithm based on queen bee for scheduling a flexible flow line with blocking, Proceeding of the 1st Tehran Int. Congress on Manufacturing Engineering (TICME2005), Tehran, 13-15 December, 2005. | | 74) Rabbani, M. and Tavakkoli-Moghaddam, R., Multiple criteria sequencing problem for mixed-model assembly line in a just-in-time production system, Annual Int. Scientific Conf. on Operations Research, Bremen: Germany, 7-9 September, 2005. | | 75) Tavakkoli-Moghaddam, R. and Vasei, M., A simulated annealing and a branch-and-bound algorithm for the single machine sequencing to minimize the sum of maximum earliness and tardiness considering idle insert, Proceeding of the Third European Conf. on Intelligent Management Systems in Operations, Salford: U.K., June 28-29, 2005, pp. 43-52. | | 76) Tavakkoli-Moghaddam, R. and Safaei, N., A new dynamic cell formation model with machine cost, alternative process plan and cell size by simulated annealing, Proceeding of the Third European Conf. on Intelligent Management Systems in Operations, Salford: U.K., June 28-29, 2005, pp. 157-166. | | 77) Tavakkoli-Moghaddam, R., Babakhani, M. and Safaei, N., A neural approach for constraint satisfaction of a generalized job shop scheduling problem with fuzzy process times, Proceeding of the Third European Conf. on Intelligent Management Systems in Operations, Salford: U.K., June 28-29, 2005, pp. 256-265. | | 78) Tavakkoli-Moghaddam, R., Rabbani, M., Saremi, A.and Safaei, N., Solving the backhaul vehicle routing problem by genetic algorithms, Proceeding of the 35th Int. Conf. on Computers and Industrial Engineering, Istanbul: Turkey, June 19-22, 2005, pp. 1905-1910. | | 79) Tavakkoli-Moghaddam, R., Rabbani, M., Hakami, M. and Kazemi, M., Heuristic algorithms to solve a bi-criteria traveling salesman problem with fuzzy time window, Proceeding of the 35th Int. Conf. on Computers and Industrial Engineering, Istanbul: Turkey, June 19-22, 2005, pp. 1899-1904. | | 80) Tavakkoli-Moghaddam, R., Safaei, N. and Karimi, B., Scheduling of flexible flow lines with blocking by genetic algorithms, Proceeding of the 35th Int. Conf. on Computers and Industrial Engineering, Istanbul: Turkey, June 19-22, 2005, pp. 1911-1916. | | 81) Tavakkoli-Moghaddam, R., Saidi-Mmehrabad, M. and Safaei, N., A new generalized cell formation model in uncertainty and dynamic conditions by assuming routing flexibility and machine relocation, Proceeding of the 35th Int. Conf. on Computers and Industrial Engineering, Istanbul: Turkey, June 19-22, 2005, pp. 1893-1898. | | 82) Rabbani, M., Ebadian, M., Jolai, F., Tavakkoli-Moghaddam, R. and Torabi, A., A new methodology for managing order entry stage in make to order environments, The 35th Int. Conf. on Computers and Industrial Engineering, Istanbul, Turkey, June 19 – 22, 2005, pp. 1591-1596. | | 83) Tavakkoli-Moghaddam, R., Rabbani, M., Safaei, N. and Shariat, M.A., Vehicle routing problems with soft time windows by an efficient method, Proceeding of the First Int. Conf. on Modelling, Simulation and Applied Optimization, Sharjah: U.A.E., February 1-3, 2005. | | 84) Tavakkoli-Moghaddam, R., Safaei, N., Torfi, F. and Rasti, M., A new capacitated vehicle routing problem to minimize the fleet cost and maximize capacity utilization, Proceeding of the First Int. Conf. on Modelling, Simulation and Applied Optimization, Sharjah: U.A.E., February 1-3, 2005. | | 85) Rabbani, M., Tavakoli-Moghddam, R., Miraliyari, S.-A. and Ebadian, M., Bi-objective optimization of LLT production systems in batch manufacturing environment: minimum WIP cost and resource overtime cost, Proceeding of the First Int. Conf. on Modelling, Simulation and Applied Optimization, Sharjah: U.A.E., February 1-3, 2005. | | 86) Tavakkoli-Moghaddam, R. and Biyabani, H., The use of genetic algorithms for aggregate production planning, Proceeding of the 4th Int. Symposium on Intelligent Manufacturing Systems, Sakarya: Turkey, September 6-8, 2004, pp. 683-692. | | 87) Tavakkoli-Moghaddam, R., Rabbani, M. and Ghodratnama, A., Allocating parts to manufacturing cells by a meta heuristic algorithm, Proceeding of the 4th Int. Symposium on Intelligent Manufacturing Systems, Sakarya: Turkey, September 6-8, 2004, pp. 693-702. | | 88) Tavakkoli-Moghaddam, R., Jolai, F., Haji, R. and Vaziri, F., An efficient algorithm for stochastic job shop scheduling problems, Proceeding of the 1st Int. Conf. on Industrial Engineering, Vol. 2, Tehran: Iran, July 13-4, 2004, pp. 15-28. | | 89) Tavakkoli-Moghaddam, R., Rabbani, M. and Taghavi, S.-M., Solving manpower scheduling problems by simulated annealing, Proceeding of the 33rd Int. Conf. on Computers and Industrial Engineering, Jeju Island, Korea, March 25-27, 2004. | | 90) Razmi, R., Tavakkoli-Moghaddam, R., and Karbasian, S., Developing a comprehensive information system for a car company within supply chain, Proceeding of the 33rd Int. Conf. on Computers and Industrial Engineering, Jeju Island, Korea, March 25-27, 2004. | | 91) Tavakkoli-Moghaddam, R. and Daneshmand-Mehr, M., A computer simulation model for job shop scheduling problems minimizing makespan, Proceeding of the 30th Int. Conf. on Computers and Industrial Engineering, Tinos Island, Greece, June 29 - July 2, 2002, pp. 887-892. | | 92) Tavakkoli-Moghaddam, R. and Mardan, S., An evolutionary algorithm for solving cell formation problems considering production volume and process sequence, Proceeding of the 30th Int. Conf. on Computers and Industrial Engineering, Tinos Island, Greece, June 29 - July 2, 2002, pp. 893-898. | | 93) Rabbani, M. and Tavakkoli Moghaddam, R., A new approach to computation completion time distribution function of stochastic pert networks, Proceeding of the 1st Int. NAISO Congress on Autonomous Intelligent Systems, Geelong: Australia, February 12-15, 2002. | | 94) Tavakkoli-Moghaddam, R. and Sheibani, K., The use of an evolutionary computing for solving course scheduling problems, Proceeding of the 1st Int. NAISO Congress on Autonomous Intelligent Systems, Geelong: Australia, February 12-15, 2002. | | 95) Tavakkoli-Moghaddam, R.; Rabbani, M. and Ali-Hosseini, A.R., Solving location-allocation problem by an evolutionary algorithm, Proceeding of the 1st Int. NAISO Congress on Autonomous Intelligent Systems, Geelong: Australia, February 12-15, 2002. | | 96) Azadeh, A.; Tavakkoli-Moghaddam, R. and Sharifi, S., Design of a human-centered expert system for strategic planning, Proceeding of the 5th Int. Conf. on Engineering Design & Automation, Las Vegas: USA, August 5-8, 2001, pp. 626-632. | | 97) Tavakkoli-Moghaddam, R., Using GA to solve a continuous plane model to machine layout problems, Proceeding of the 7th Int. Conf. on Industrial Engineering and Engineering Management, November 28-30, 2000, Guangzhou: China, pp. 237-243. | | 98) Tavakkoli-Moghaddam, R., Shayan, E. And Nagarajah, R., Using GA to solve a continuous plane model to machine layout problems, Proceeding of the 26th Int. Conf. on Computers and Industrial Engineering, December 8-10, 1999, Melbourne: Australia, pp. 583-587. | | 99) Tavakkoli-Moghaddam, R., A genetic algorithm-based heuristic for manufacturing facilities layout problems, Proceeding of the 3rd Int. Mechanical Engineering Conf., Tehran: Iran, May 18-20, 1998, pp. 525-532. | | 100) Masood, S.H. and Tavakkoli-Moghaddam, R., Design of precision cylindrical cams suitable for applying CAD/CAM, Proceeding of the 3rd Int. Mechanical Engineering Conf., Tehran: Iran, May 18-20, 1998, pp. 513-518. | | 101) Tavakkoli-Moghaddam, R. and Shayan, E., A genetic algorithm for solving facilities layout problems, Proceeding of the 4th Int. Conf. of the Association of Asian-Pacific Operational Research Societies, Melbourne: Australia, November 3 – December 4, 1997. | | 102) Tavakkoli-Moghaddam, R. and Shayan, E., An analysis of the genetic operators affecting the performance of genetic algorithms for facilities layout problems, Proceeding of the 7th Int. Conf. on Manufacturing Engineering, Cairns: Australia, September 15-17, 1997, pp. 51-60. | | 103) Tavakkoli-Moghaddam, R.; Shayan, E. and Nagarajah, R., Cell formation and layout issues in cellular manufacturing systems: a survey of developments, Proceeding of the Int. Conf. on the Application and Implementing of Advanced Engineering & Design, Manufacturing, and Automation Technology, Jakarta: Indonesia, December 12-13, 1996, pp. 84-92. | | 104) Tavakkoli-Moghaddam, R. and Shayan, E., Manufacturing facilities design: A state-of-the-art survey of traditional modelling, Proceedings of the 2nd Int. Mechanical Engineering Conf., Shiraz: Iran, May 14-17, 1996, pp. 887-894. | | 105) Tavakkoli-Moghaddam, R. and Shayan, E., Manufacturing facilities design: A state-of-the-art survey of advanced modelling, Proceedings of the 2nd Int. Mechanical Engineering Conf., Shiraz: Iran, May 14-17, 1996, pp. 877-885. | | 106) Tavakkoli-Moghaddam, R. and Colville, E.J., Production planning derived from a manufacturer’s budget to provide man, machine and material requirements, Proceedings of the 2nd Int. Mechanical Engineering Conf., Shiraz: Iran, May 14-17, 1996, pp. 925-933. | | 107) Rabbani, M., Tavakkoli-Moghaddam, R. and Mohammadipour, M., Fuzzy mathematical programming application in job-shop scheduling, Proceeding of the 33rd Int. Conf. on Computers and Industrial Engineering, Jeju Island, Korea, March 25-27, 2004. |
|
معاونت ها
