HOME  >  Faculty Members  >  Resume of Faculty Members Search: > Faculty Members > Raisee Dehkordi Mehrdad Scientific Position:Associate Professor Ph.D.:Mechanical Engineering, UMIST, Manchester, UK M.Sc.:Mechanical Engineering, Faculty of Engineering, University of Tehran B.Sc.:Mechanical Engineering, Isfahan University of Technology > Contact Information Department of Mechanical Engineering, Faculty of Engineering, University of Tehran, P.O.Box 11365/4563, Tehran, Iran. Tel:+98(21)88337123 Fax:+98(21)88013029 Email: mraisee@ut.ac.ir > Responsibilities Head of Fluid Mechanics Laboratory Associate Chair for Undergraduate Studies > Research Interests Simulation of Forced and Natural Convection in Complex Geometries Mathematical Modeling of Turbulent Flows with Heat Transfer Using RANS, LES and DNS Prediction of Performance of Gas Turbines and Jet Engines Microfluidics & Nanofluidics > Current Researches Effects of Curvature and Rotation on Turbulence Turbulent Impinging Jet Turbulent Flow and Heat Transfer in Rib-Roughened Passages and Ducts with Wavy Walls Influences of Manufacturing Tolerances of Turbine Blades on Performance of Gas Turbines Micro and Nano-Scale Flow and Heat Transfer CFD Modeling of AOP for Waste Water Reuse > Courses Turbulence Fluid Mechanics I and II Gas Turbine and Jet Engine Advanced Numerical Methods Micro & Nano Fluid Mechanics Heat Transfer > List of Publications > A: Papers in International Journals Shahraeeni, M. and Raisee, M., 2010, "Investigation of Turbulent Mixed Convection of Air Flow in Vertical Tubes Using a Zonal Turbulence Model", Int. J. of Heat and Fluid Flow, (In Press). Raisee, M., Jafari, A., Babaei, H., and Iacovides, H., 2010 "Two-dimensional Prediction of Time Dependent Turbulent Flow Around a Square Cylinder Confined in a Channel", Int. J. for Numerical Methods in Fluids (In Press). Raisee, M., and Vahedi, N., 2010, “Prediction of Gas Flow through Short and Long 2-D Micro and Nano-Channels Using a Generalized Slip Model”, Int. J. of Heat Transfer Engineering, Vol. 31, Issue 8, pp. 675 - 681. Riasi, A.,Nourbakhsh, A. and Raisee, M., 2010,"Unsteady Velocity Profiles in Laminar and Turbulent Water Hammer Flows", ASME J. of Fluids Engineering,Vol. 131 / 121202-1. Celik,B.,Raisee,M. and Beskok, A., 2010,"Heat Transfer Enhancement in a Slot Channel Via a Transversely Oscillating Adiabatic Circular Cylinder",Int. J. of Heat and Mass Transfer, Vol. 53, Issue 4, pp. 626-634. Riasi, A., Nourbakhsh, S. A. and Raisee, M., 2009 "Computation of Unsteady Turbulent Pipe Flow due to Water Hammer using k-w Turbulence Model", J. of Hydraulic Research,Vol. 47, No. 4 , pp. 429–437. Raisee, M. and Rokhzadi, A., 2009, "Prediction of Turbulent Flow and Heat Transfer in Channels with Array of Detached and Alternative Attached-Detached Ribs" Int. Journal of Numerical Methods for Heat & Fluid Flow, Vol. 19, Issue 3, pp.266-284. Raisee, M., Naeimi, H., Alizadeh, M., and Iacovides, H., 2009,"Prediction of Flow and Heat Transfer through Stationary and Rotating Ribbed Ducts Using a Non-linear k-e Model", Springer, J. of Flow, Turbulence and Combustion, Vol. 82, No.1, pp.121–153. Raisee, M., 2008, "Recent Progress in Prediction of Complex Turbulent Flows Using a Cubic Non-Linear Eddy-Viscosity Model", Physica Scripta, T132 014004, pp. 1-7. Raisee, M. and Moghaddami, M., 2008, "Numerical Investigation of Laminar Forced Convection of Nanofluids Through Circular Pipes" Journal of Enhanced Heat Transfer, Vol. 15, No. 4, pp. 335-350. Iacovides, H. and Raisee, M., 2008, "Turbulent Flow and Heat Transfer in Stationary and Rotating Cooling Passages with Inclined Ribs on Opposite Walls", Int. Journal of Numerical Methods for Heat & Fluid Flow, Vol. 18, Issue 2, pp. 258 - 278. Raisee, M. and Hejazi, S. H., 2007, “Application of Linear and Non-linear Low-Re k-e Models in Two-Dimensional Predictions of Convective Heat Transfer in Passages with Sudden Contractions, Int. J. of Heat and Fluid Flow, Vol. 28, Issue 3, pp. 429-440. Raisee, M., Noursadeghi, A., Hejazi, B., Khodaparast, S. and Besharati, S., 2007, "Simulation of Turbulent Heat Transfer in Jet Impingement of Air Flow onto a Flat Wall", J. of Engineering Applications of Computational Fluid Mechanics, Vol. 1, No. 4, pp. 314-324. Raisee, M., Alemi, H., and Iacovides, H., 2006, “Prediction of Developing Turbulent Flow in Curved Ducts using Linear and Non-linear Models”, Int. J. for Numerical Methods in Fluids, Vol. 56, pp. 1379-1405. Raisee, M., Noursadeghi, A. and Iacovides, H., 2004 "Application of a Non-linear k-e Model in Prediction of Convective Heat Transfer through Ribbed Passages", Int. J. of Num. Methods for Heat & Fluid Flow, Vol. 14, No 3, pp. 285-305. Iacovides, H., Kelemenis, G., and Raisee, M., 2003, “Flow and Heat Transfer in Straight Cooling Passages with Inclined Ribs on Opposite Walls: An Experimental and Computational Study”, J. of Exp. Thermal and Fluid Science, Vol. 27, pp. 283-294. Iacovides, H., and Raisee, M., 2001, “Computation of Flow and Heat Transfer in Two-Dimensional Rib-Roughened Passages, Using Low- Reynolds Number Turbulence Models”, Int. J. of Num. Methods for Heat & Fluid Flow, Vol. 1, pp.138-155. Iacovides, H., and Raisee, M., 1999, “Recent Progress in Computation of Flow and Heat Transfer in Internal Cooling Passages of Turbine Blades”, Int. J. of Heat & Fluid Flow, Vol. 20, pp. 320-328. > B: Selected Papers in Conference Proceedings Celik, B., Beskok, A. and Raisee, M., 2009, "Heat Transfer Enhancement in a Straight Channel Via a Transversely Oscillating Adiabatic Circular Cylinder", First International Conference on Computational Methods for Thermal Problems, Naples, Italy. Raisee, M., Vahedi, N. and Rostamzadeh, A., 2008, "Prediction of Gas Flow through Short and Long 2-D Micro and Nano-Channels Using a Generalized Slip Model", ICNMM2008, Darmstadt, Germany. Raisee, Mehrdad, Moghaddami, Mostafa and Niroobakhsh, Zahra, 2008, "Numerical Investigation of Nanofluids in Circular Pipes under Uniform Heat Flux and Constant Wall Temperature", CHT-08, Marrakech, Morocco. Raisee, M. and Shahraeeni, M., 2007, "Numerical Simulation of Laminar Mixed Convection of Air Flow through Uniformly Heated Vertical Tubes", Proc. of HT2007, Vancouver, British Columbia, Canada. Raisee, M., Naeimi, H. and Iacovides, H., 2007, "Prediction of Three-Dimensional Flow and Heat Transfer through Ribbed DuctsUsing a Cubic Non-Linear k-e Model", Proc. of TSFP5, Munich, Germany. Raisee, M. and Bageri, S, 2007, "Computation of Turbulent Flow in a Rotor-Stator Cavity with and without Throughflow using Two-layer k-e and DSM Models", Annual International Conference on Mechanical Engineering, Tehran, Iran. Raisee, M., 2007, “Recent Progress in Prediction of Complex Turbulent Flows Using a Cubic Non-linear Eddy-viscosity Model”, Turbulent Mixing and Beyond International Conference, ICTP, Trieste, Italy. Raisee, M. and Rokhzadi, 2006, “Prediction of Turbulent Flow and Heat Transfer in Channels with Arrays of Detached and Alternative Attached-Detached Ribs, Second International Conference “From Scientific Computing to Computational Engineering”, Athens, Greece. Raisee, M., Alemi, H. and Iacovides, H., 2004, "Prediction of Developing Turbulent Flow in a 90 deg Curved Duct Using Linear and Nonlinear Low-Re k-e Models", Proc. of ESDA 2004, Manchester, UK. Raisee, M., and Saneei, A., 2004, “Numerical Study of Unsteady Laminar Flow in Rotating Cavities”, Proc. Int. Conference on Computational Methods, National University of Singapore, Singapore. Raisee, M., Noussadeghi, A., and Iacovides, H., 2004, “Prediction of Convective Heat Transfer through Ribbed Passage Using a Non-linear Model”, Proc. of 6th ASME-JSME Thermal Engineering Joint Conference, Hawaii, USA. Iacovides, H., and Raisee, M., 2004, “Turbulent Flow and Heat Transfer in Stationary and Rotating Cooling Passages with Inclined Ribs on Opposite Walls”, Proc. of ASME Turbo-Expo Power for Land, Sea and Air, Vienna, Austria. Raisee, M., and Samanipour, S., 2001, “Numerical Study of Laminar Flow in Rotating Cavities with Radial Outflow”, Proceeding of 5th Int. and 9th Annual Mechanical Engineering Conference, Rasht, Iran. Raisee, M., 2001. “Numerical Study of Fully-Developed Turbulent Flow and Heat Transfer in Coolant Channels with Normal Ribs”, Proceeding of 9th Annual Conference of CFD Society of Canada, Waterloo, Canada. Iacovides, H., Kelemenis, G., and Raisee, M., 2001, “On the Effects of Inclined Ribs on the Flow and Thermal Development in Straight Cooling Passages; An Experimental and Computational Study”, Proceeding of 4th European Conference on Turbomachinary, Fluid Dynamics, and Thermodynamics, Florence, Italy. Iacovides, H. and Raisee, M., 1997, “Computation of Flow and Heat Transfer through 2D Artificially Rib-Roughened Passages”, 2nd Int. Symp. on Turbulent Heat and Mass Transfer”, Delft, Netherlands. webadmin@engmail.ut.ac.ir   tel: (+9821) 88003323, 88020403 (EXT. 4234, 4276)